Tester & Detector
Fluke i1010 AC/DC Current Clamp
- Fluke current clamps extend the current ranges of Fluke tools.
- The Fluke i1010 AC/DC current clamp is highly reliable, measures 1 A to 1000 A, and provides accurate current reading without breaking the circuit.
- This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult-to-reach areas.
- Compatible with most Fluke multimeters.
| Specifications | |
| Measurement type | Hall sensor |
| Nominal current range | 600 A, AC 1000 A, DC |
| Continuous current range | 1 A – 600 A, AC 1 A – 1000 A, DC |
| Maximum non-destructive current | 1000 A |
| Lowest measurable current | 0.5 A |
| Basic accuracy | 2% + 0.5 A (% reading + floor spec) |
| Useable frequency | DC – 10 kHz |
| Output level(s) | 1 mV/A |
| Zero error adjustment | Yes |
| Safety Specifications | |
| Safety | CAT III, 600 V |
| Maximum voltage | 600 V |
| Mechanical and General Specifications | |
| Warranty | 1 year |
| Battery life | 9 V, 60 h |
| Maximum conductor diameter | 30 mm 2 x 25 mm |
| Output cable length | 1.6 m |
| Shrouded banana plugs | Yes |
Reviews
There are no reviews yet.