Fluke i1010 AC/DC Current Clamp
- Fluke current clamps extend the current ranges of Fluke tools.
- The Fluke i1010 AC/DC current clamp is highly reliable, measures 1 A to 1000 A, and provides accurate current reading without breaking the circuit.
- This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult-to-reach areas.
- Compatible with most Fluke multimeters.
|Measurement type||Hall sensor|
|Nominal current range||600 A, AC
1000 A, DC
|Continuous current range||1 A – 600 A, AC
1 A – 1000 A, DC
|Maximum non-destructive current||1000 A|
|Lowest measurable current||0.5 A|
|Basic accuracy||2% + 0.5 A
(% reading + floor spec)
|Useable frequency||DC – 10 kHz|
|Output level(s)||1 mV/A|
|Zero error adjustment||Yes|
|Safety||CAT III, 600 V|
|Maximum voltage||600 V|
|Mechanical and General Specifications|
|Battery life||9 V, 60 h|
|Maximum conductor diameter||30 mm
2 x 25 mm
|Output cable length||1.6 m|
|Shrouded banana plugs||Yes|
There are no reviews yet.